1/2" DN15 BSP SS304 Single Acting Air Actuated Angle Seat Valve Normally Open
$ 20.3
Description
1/2" DN15 BSP SS304 Single Acting Air Actuated Angle Seat Valve Normally Open. DN15 1/2" BSP Stainless Steel Single Acting Air Actuated Angle Seat Valve Normally Open. Model: 1/2" DN15. 5, valve and pipe connections are tight enough torque required force, a force the size of torque values are as follows: DN15 to 40Nm, DN20 to 50Nm, DN25 to 70Nm. DN15 1/2" BSP Stainless Steel Single Acting Air Actuated Angle Seat Valve Normally Open Model: 1/2" DN15 Type: Normally Open Fluid Pressure :1.6Mpa / 232Psi / 16Bar C ontrol pressure: 0.3Mpa-0.8Mpa / 3Bar-8Bar Material of body: 304 Stainless steel Material of actuator : Polyamide Medium temperature:-10℃ -135℃ Ambient Temperature: -10℃ -60℃ Medium: Air ,Gas ,water Fluid direction: A OR B Body Material: Stainless Steel Sealing Material: PTFE Actuator housing: polyamide press, stainless steel Controlling gas: neutral gases, air Control liquid: industrial automation control fluid, food grade milk industry, domestic water, ordinary piping fluid media. Application: 1, beer and beverage equipment / beer & drinks 2, printing textile / textile printing & dying; 3, the gas industry / gas industry; 4, pharmaceutical and medical equipment / pharmacy & medical equipment; 5, chemical industry / chemical industry; 6, high temperature sterilization / disinfection; 7, foaming / frothing equipment; 8, water pollution treatment / water sewage disposal. Angle works: In the non-working state, the action of the spring, the valve normally open or normally closed. When the actuator piston is compressed gas valve open or closed, double-acting form by compressed gas control valve switch Installation and removal: 1, connect the valve to the pipe, to ensure consistency with the flow direction attached to the body (the body outside of the represents the direction of fluid flow, follow the installation); 2, welding installation: Please detach the actuator during welding; 3, threaded, flanged, quick installation: can be installed properly; 4, demolition: Before disassembling the valve to ensure that pressure has been lifted; light unloading; after the demolition to protect the threads and sealing materials; 5, valve and pipe connections are tight enough torque required force, a force the size of torque values are as follows: DN15 to 40Nm, DN20 to 50Nm, DN25 to 70Nm, DN32 to 150Nm, DN40 to 150Nm, DN50 to 170Nm, DN80 to 240Nm, DN100 is 300Nm. 6, when installed, make sure the pipeline and residue-free interface. 7, after installation, testing and joints sealed intact, no leaks before use.
