1/2" NPT Single Acting Air Actuated Angle Seat Valve NC Stainless Steel 304
$ 23.13
Description
1/2" NPT Single Acting Air Actuated Angle Seat Valve NC Stainless Steel 304. 1/2" Single Acting Air Actuated Angle Seat Valve Stainless Steel 304 Normally Closed. Size:1/2" (DN15) NPT. Body material: Stainless Steel 304. Body angle seat structure, can achieve high flow (especially compared with the ordinary cut-off valve),Compact and fast response. 1/2" Single Acting Air Actuated Angle Seat Valve Stainless Steel 304 Normally Closed Medium environment: -10 ℃ ~ + 180 ℃ Ambient temperature:-10 ℃ ~ + 60 ℃ Nominal pressure:1.6Mpa Viscosity: Max 600MM2/S Suitable Media: Air,water Control gas: neutral gas and air Air pressure:0.3~1Mpa (43.5psi~145psi) Size:1/2" (DN15) NPT Body material: Stainless Steel 304 Sealing material: PTFE Features: 1. With valve on or off position display. 2. External pneumatic pilot, can increase the service life, maintenance-free. 3. Self-adjusting sealing gland is provided between the overflow port and the slide to improve the sealing performance. 4. Body angle seat structure, can achieve high flow (especially compared with the ordinary cut-off valve),Compact and fast response. Installation and maintenance The applicable safety regulations must be observed 1. The piping must be clean and free from contamination. 2. Install as required, but preferably with the actuator facing up. Note the flow direction. 3. Attaching the valve CAUTION Align the piping and remove the actuator only when the user has a special request. 4. Before opening or servicing the angle valve, cut off the fluid and control the air supply and reduce the pressure in the piping system.
