Electric Solenoid Valve Brass Water Air Gas Normally Closed 2-inch NPT AC110V

Description

Specification Model: 2W500-50 Color: Gold, Black Material: Brass, Iron Style: Modern Voltage: AC 110V Type: American Standard Surface Treatment: Polished Process Thread Type: NPT Gasket Type: NBR Orifice: 50mm/1.9inch Pipe Size: 2inch/5cm Working Temperature: -5-80℃/-41-176℉ Operating Pressure: 0-10kg/cm² (0-142psi) Working Medium: Air, Gas, Water, Oil (Exclude Gasoline&Kerosene) Type: Two-way, Normally Closed Flow Direction: One-way Transmission Mode: Direct-acting. Net Weight: 2.3kg/5.0lbs Gross Weight: 2.4kg/5.2lbs Package Size: 18*13*9.5cm/7*5*3inch Product Size: 12.3*9.3*17.6cm/4.8*3.7*6.9inch Thread Diameter: 5.8cm/2.3inch Electric Solenoid Valve Brass Water Air Gas Normally Closed 2-inch NPT AC110V 2" NPT Electric Solenoid Valve 110V AC Normally Closed Solenoid Valve Description Made of high-quality brass and iron, this electric solenoid valve is strong and durable. It can quickly open or close the flow and can be used many times. The threads and a gasket ensure a tight connection. It is applicable to non-corrosive water, gas and other media. Details Round Edges: Round edges rather than sharp edges can avoid scratching your hands. Two-way Type: The two-way type makes it easy to be connected with pipes. Application It is suitable for hot or cold water (-41-176℉), gas, air, low viscosity fluids (<20 cst), oils and hydrocarbons, or diesel fuel. It can be used in DIY projects, medium-temperature applications, harsh chemicals, flow control of irrigation systems, reverse osmosis systems, home brewing, home swimming pools, home water towers, and industrial wastewater discharge. Specification Model: 2W500-50 Color: Gold, Black Material: Brass, Iron Style: Modern Voltage: AC 110V Type: American Standard Surface Treatment: Polished Process Thread Type: NPT Gasket Type: NBR Orifice: 50mm/1.9inch Pipe Size: 2inch/5cm Working Temperature: -5-80℃/-41-176℉ Operating Pressure: 0-10kg/cm² (0-142psi) Working Medium: Air, Gas, Water, Oil (Exclude Gasoline&Kerosene) Type: Two-way, Normally Closed Flow Direction: One-way Transmission Mode: Direct-acting. Net Weight: 2.3kg/5.0lbs Gross Weight: 2.4kg/5.2lbs Package Size: 18*13*9.5cm/7*5*3inch Product Size: 12.3*9.3*17.6cm/4.8*3.7*6.9inch Thread Diameter: 5.8cm/2.3inch Solenoid Valve Installation Instructions Please clean and rinse the impurities in the pipeline before installation. The thread should be wound with tape. Be careful not to drop the debris into the pipeline to prevent blocking the solenoid valve. When installing, keep the arrow direction on the valve body consistent with the flow direction of the medium. If there is reverse pressure, a check valve shall be installed. All valves are unidirectional, and they need to be installed in the direction of the arrow when in use. If the connection direction is opposite, the valve will not start/close normally. To extend the service life of the solenoid valve, the installation should be horizontal and the coil should be installed vertically upwards. After the solenoid valve coil outlet wire (connector) is connected, it should be confirmed whether the contact of electrical components is firm. Shake or loose may cause the solenoid valve unable to work. Solenoid valves that are out of service for a long time should be cleaned of impurity condensation before use. Solenoid valves are not suitable for fluids under the following conditions: A. Changing into a liquid by heating and into a solid by cooling. B. Viscosity greater than CST20 C. Fluid with impurities that are easy to block the valve. Pay attention to the insulation of the circuit. The wire has no requirements for positive and negative poles. The valve is not a continuous working valve, and the continuous use time in a single cycle shall not exceed 2 hours. Overuse will shorten the service life of the valve and may cause the valve core to burn out. Package Included 1* Electric Solenoid Valve Notes 1. Due to the chemical composition of brass, this valve should not be used with drinking water. 2. All solenoid valves need some pressure to actuate. 3. Please don't use the gasket for gasoline or it will corrode the gasket and can cause serious gasoline leakage or fire. 4. When it is used in low temperature or freezing environment, please heat the solenoid valve or set thermal insulation measures. 5. When the solenoid valve is installed in the pipeline that needs continuous production, it is better to build a bypass pipeline to facilitate the repair and maintenance of the solenoid valve and avoid the impact on production. 6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Payment Delivery details Terms of sales About us Contact us Payment We accept ebay payment 。 Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Shipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About us Your satis faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you. Contact us Business Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions. Features ❤Compact Design,Beautiful Appearance❤ Brand Unbranded MPN Does not apply Valve Operation Solenoid Model 2W500-50 Material Brass, Iron Voltage AC 110V Thread Type NPT Gasket Type NBR Orifice 50mm/1.9inch Working Temperature -5-80℃/-41-176℉ Working Medium Air, Gas, Water, Oil Operating Pressure 0-10kg/cm² (0-142psi) Flow Direction One-way EAN Does not apply UPC Does not apply ISBN Does not apply On Feb 5, 2025 at 19:47:16 PST, seller added the following information: