62468 Adapter Mow-N-Vac Kit Universal Deck Boot Chute Leaf Vacuum Bagger
$ 59.74
Description
Fitment: This is a fairly universal deck chute adapter to be used with lawn & leaf vacuums. It mounts down by the side discharge on your deck to connect the leaf vacuum hose to your deck Note: Also included with this chute are several templates for some of the more common decks. Templates include some of the following decks, although individual decks may vary from the same manufacturer even if they are the same width: For AYP/Craftsman/Sears/Husqvarna 42" Deck For AYP/Craftsman/Sears/Husqvarna 46" Deck For AYP/Craftsman/Sears/Husqvarna 46" Deck (2 Blade) For AYP/Craftsman/Sears/Husqvarna 48" Deck For AYP/Craftsman/Sears/Husqvarna 54" Deck For Cub Cadet 42" Deck For Cub Cadet 46" Deck (For Deep Dish Deck) For Cub Cadet 46" Deck (For 2000 & 3000 Series Tractors) For Cub Cadet 48" Deck For Cub Cadet 54" Deck (For 2000 & 3000 series tractors) For John Deere 38" Deck For John Deere 42" Deck (For "L" series) For John Deere 48" Deck (For "L" Series) For John Deere 50" Deck For MTD 38" Deck (Deep Dish Deck) For MTD 42" Deck (Deep Dish Deck) For MTD 46" Deck (Deep Dish Deck) For MTD 54" Deck Features: 1) This chute is plastic, and requires modification to fit a specific tractor. You will need to cut out from the plastic (with a hacksaw or some other type of saw or knife) where the chute attaches to the deck to make it fit your mower. Also, this unit should work with 6" or 7" leaf vacuum hose, but again you may need to make a few more cut 2) This should fit many models and makes of lawn tractors. Basically, as long as the discharge on your mower is not wider/longer than the length/depth of this one, you should be able to cut this one to make it fit yours 3) The mounting surface on this one is about 20.25" long by about 6.25" tall and you can cut back around 5" deep towards the center of the chute.Also included with this chute are several templates for some of the more common decks.Templates include some of the following decks, although individual decks may vary from the same manufacturer even if they are the same width 4) The adapter mounts down by the side discharge on your deck to connect the leaf vacuum hose to your deck.This chute is plastic, and requires modification to fit a specific tractor. Need to cut out from the plastic (with a hacksaw or some other type of saw or knife) where the chute attaches to the deck to make it fit your mower 5) This unit should work with 6" or 7" leaf vacuum hose, but again you may need to make a few more cuts! The mounting surface on this one is about 20.25" long by about 6.25" tall and allows to cut back around 5" deep towards the center of the chute Package included: 62468 Adapter
